DSL-2640T ADSL 2+ Router User Guide
31
3. In the Group Key Interval entry field, enter a Time (in seconds) after which the Group Key is changed
automatically.
4. Select either Radius Server or Pre-Shared Key depending on the varification you are using for the Wireless
network.
a. If you are using a Radius Server for
authentication, select the Radius Server button
and enter the server IP Address of the
RADIUS server, a Port number (or accept the
default), and a “Shared” Secret (1-63
characters).
b. If you are using a Pre-Shared Key, type an alphanumeric value of 1-63 characters in length used for
authentication.
5. Click Apply.
Notice The values needed for
Radiusauthentication can be
obtained from your Internet
Service Provider (ISP).
To Next Page
Loading...
