DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Configuring via Web-based Interface
In the General Settings section, the following parameters are available:
Parameter Description
Enable Wireless
To enable Wi-Fi connection, move the switch to the right.
To disable Wi-Fi connection, move the switch to the left.
Country The country you are in. Select a value from the drop-down list.
Wireless mode
Operating mode of the wireless network of the router. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Select channel
automatically
Move the switch to the right to let the router itself choose the
channel with the least interference.
Channel
The wireless channel number. Left-click to open the window for
selecting a channel (the action is available, when the Select
channel automatically switch is moved to the left).
When you have configured the parameters, click the APPLY button.
To edit the settings of the basic wireless network, in the Wi-Fi Network section, change the needed
parameters and click the APPLY button.
Page 103 of 174
To Next Page
Loading...
Need help?
Data Transfer Rates
