D-Link DSL-2750U

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Path
Locate data of the Transmission client. To do this, click the Search
icon ( ), select the needed value, and click the SELECT button.
Directory
The folder on the USB storage where data of the Transmission client
will be stored.
Enable download
queue
Move the switch to the right if you want to limit the number of
simultaneous downloads. Upon that the Download queue size
field will be displayed.
Move the switch to the left not to limit the number of simultaneous
downloads.
Download queue size
The maximum number of simultaneous downloads. By default, the
value 1 is specified.
Peer limit
The maximum number of the service users from which you can
download files.
Web interface port
The port on which the web-based interface of the Transmission
client is available.
Authorization
Enable
Move the switch to the right if you want the Transmission client to
request for username and password when accessing its web-based
interface. Then fill in the Username and Password fields.
Username
The username to access the web-based interface of the Transmission
client.
Password
The password to access the web-based interface of the Transmission
client. Click the Show icon ( ) to display the entered password.
After specifying the needed parameters, click the APPLY button.
In the Web-interface page field, the address of the web-based interface of the Transmission
client is displayed. To access the web-based interface of the Transmission client, click the link.
Page 149 of 210