D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
When the Protocol is Dynamic IP Address, on the next Page name your wireless
network.
2.4G Wireless Network Name (SSID): Enter the 2.4G wireless network name
(SSID).
5G Wireless Network Name (SSID): Enter the 5G wireless network name (SSID).
Click the Prev to return to the previous page
Click the Next to continue to the next page
Click the Cancel to cancel the setup wizard
Click the Connect button to connect to the internet.
When the Protocol is Static IP Address, on the next Page enter the PPPOE
information.
IP Address: Enter the IP address.
Subnet Mask: Enter the subnet mask.
Default Gateway: Enter the default gateway.
Click the Prev to return to the previous page
Click the Next to continue to the next page
Click the Cancel to cancel the setup wizard
Click the Connect button to connect to the internet.
When the Protocol is PPPOE, on the next Page enter the PPPOE information.
User Name: Enter the user name.
Password: Enter the password.
Confirm Password: Enter the confirm password.
Click the Prev to return to the previous page
Click the Next to continue to the next page
Click the Cancel to cancel the setup wizard
Click the Connect button to connect to the internet.
To Next Page
Loading...
Need help?
General
