ATM VC Setting
Select Internet Connection Type as ADSL to configure the ADSL setting for the
WAN mode.
PVC：Select the PVC index, it includes 8 PVC index: 0 ~ 7.
Enable Virtual Circuit：Enable or disable the virtual circuit.
Country: In this drop-down menu, the user can select one country option. To
manually configure this connection, the user can choose the third option called
Other.
ISP: After selecting a country, in the previous option, a list of ISP connections will
be available here. If your ISP is in the list, select it here and the correct
parameters will be entered for the rest of the page. However, if your ISP is not
listed here, you can choose the Other option.
VPI: Enter the correct Virtual Path Identifier (VPI) value for your ISP here.
VCI: Enter the correct Virtual Channel Identifier (VCI) value for your ISP here.
Service Category: Select the service category; it includes UBR, CBR, RT-VBR and
NRT-VBR.
802.1q: Activate or Deactivate the 802.1q for the WAN mode.
VLAN ID: Enter the VLAN ID if required by your ISP.
PTM Setting
Select Internet Connection Type as VDSL to configure the VDSL setting for the
WAN mode.
Service Num：Select the service number to configure.
Enable Virtual Circuit: Enable or disable the PTM interface.
Country: In this drop-down menu, the user can select one country option. To
manually configure this connection, the user can choose the third option called
Other.
ISP: After selecting a country, in the previous option, a list of ISP connections will
be available here. If your ISP is in the list, select it here and the correct
parameters will be entered for the rest of the page. However, if your ISP is not
listed here, you can choose the Other option.
802.1q: Activated or deactivated the 802.1q for the WAN mode.
VLAN ID: Enter the VLAN ID if required by your ISP.
To Next Page
Loading...
Need help?
General
