D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
ADD WIRELESS DEVICE WITH WPS (WI-FI PROTECTED SETUP)
After clicking the Add Wireless Device with WPS button, the following page will be
available.
In this section, we can configure the following:
Auto: Select this option to automatically allow the router and the wireless client to
connect to each other by means of WPS.
Manual: Select this option to display the configured wireless settings. This
information can then be configured of the wireless clients manually to initiate a
wireless connection.
Click the Next button to continue to the next step.
Click the Cancel button to discard the changes made and return to the main menu.
Connect Your Wireless Device
After selecting the Auto option, in Step 1, the following page will be available. In this
section, we can configure the following:
PIN: Select this option to use the Personal Identification Number (PIN) method to
connect the two devices. Enter the PIN number here. Enter the same PIN
number at the wireless client software.
PBC: Select this option to use the Push Button Configuration (PBC) method to
connect the two devices.
Click the Connect button to initiate the WPS connection.
Click the Prev button to return to the previous step.
After selecting the PIN option, the following page will be available.
The router will allow 120 seconds for the WPS connection to initiate.
To Next Page
Loading...
Need help?
General
