D-Link DSL-2877AL User Manual

D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 82
RIP
The routing information protocol (RIP) is one of the most commonly used interior
gateway protocol (IGP) routing protocols on internal networks (and to a lesser
extent, networks connected to the Internet), which helps routers dynamically adapt
to changes of network connections by communicating information about which
networks each router can reach and how far away those networks are.
There is no need to activate this option normally.

D-Link DSL-2877AL Specifications

General

LAN Ports	4 x 10/100Mbps
USB Ports	1 x USB 2.0
Frequency Band	2.4 GHz
WAN Ports	1 x RJ-11 DSL port
Antenna Type	2 External Antennas
Security	WPA, WPA2
Weight	270 grams