D-Link DSL-2878 User Manual

31D-Link DSL-2878 User Manual
Section 4 - Conguration
WAN Settings
Dynamic IP (DHCP)
Select Dynamic IP Address (DHCP) to obtain an IP address automatically
from your ISP. Select this option if your ISP does not provide you with a specic
IP address.
WAN Settings
Connection: Select Dynamic IP Address (DHCP).
WAN Service Type: Select a service type from the list. As of this writing, only Internet is
supported for manual conguration.
Connection Type: Select Bridged IP LLC or Bridged IP VC-MUX.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Click Save when you are done.

D-Link DSL-2878 Specifications

General

Brand	D-Link
Model	DSL-2878
Category	Network Router
Language	English