D-Link DSL-2878

62D-Link DSL-2878 User Manual
Section 4 - Conguration
Management
Time
The Time page allows you to congure, update, and maintain the correct
time for the internal system clock. From here you can set the time zone, the
Network Time Protocol (NTP) server, and enable or disable daylight saving
time. To access this page, click Time & Schedule from the Management
menu on the bar on the top of the page.
Time: Displays the current date and time of the router.
Synchronize time
with:
Select either NTP Server automatically or uncheck to leave blank.
If you selected NTP Server automatically, the following options are available:
Time Zone: Select your time zone from the drop-down menu.
NTP Server
Address/2:
Enter the NTP server address. The default is ntp1.dlink.com. Adding
a second server is optional.
Daylight Saving: Enable or disable daylight saving time.
Time & Schedule