Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 107
In this section, the following parameters can be configured:
Checkbox: Tick this option to enable the rule.
Name: Enter the classification rule’s name here.
Queue ID: Select the queue ID that will be used for this rule here.
Protocol: Enter or select the protocol that will be used for this rule here.
Local IP Range: Enter the local IP address range that will be used for this rule
here. Two addresses must be specified. The first one is the starting IP address
and the second one is the ending IP address in the range.
Remote IP Rage: Enter the remote IP address range that will be used for this rule
here. Two addresses must be specified. The first one is the starting IP address
and the second one is the ending IP address in the range.
Application Port: Enter or select the application port option that will be used for
this rule.
To Next Page
Loading...
Need help?
General
