Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 29
After selecting to use the Username/Password Connection (PPPoA) connection
method, the following page will be available. In this section, we can configure the
following:
User Name: Enter the PPPoA username here.
Password: Enter the PPPoA password here.
Note: This information is usually supplied by the Internet Service Provider (ISP).
Click the Next button to continue to the next step.
Click the Prev button to return to the previous step.
Click the Cancel button to discard the changes made and return to the main menu.
After selecting to use the Static IP Address Connection method, the following page
will be available. In this section, we can configure the following:
IP Address: Enter the WAN static IP address here.
Subnet Mask: Enter the WAN subnet mask here.
Gateway Address: Enter the WAN gateway IP address here.
Primary DNS Address: Enter the primary DNS IP address here.
Secondary DNS Address: Enter the secondary DNS IP address here. This field is
optional.
Note: This information is usually supplied by the ISP.
Click the Next button to continue to the next step.
Click the Prev button to return to the previous step.
Click the Cancel button to discard the changes made and return to the main menu.
To Next Page
Loading...
Need help?
General
