Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 34
After selecting Non Realtime VBR as the ATM QoS method, the following
parameters will be available for configuration:
Peak Cell Rate: Enter the peak cell rate value here.
Sustainable Cell Rate: Enter the sustainable cell rate value here.
Maximum Burst Size: Enter the maximum burst size value here.
After selecting Realtime VBR as the ATM QoS method, the following parameter will
be available for configuration:
Peak Cell Rate: Enter the peak cell rate value here.
Sustainable Cell Rate: Enter the sustainable cell rate value here.
Maximum Burst Size: Enter the maximum burst size value here.
To Next Page
Loading...
Need help?
General
