Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 57
In this section, the following parameters are available to configure:
Router IP Address: Enter the local IP address for this router here. This IP address
is also used to connect to this device’s Web User Interface. Please note that
after changing this IP address you’ll be forced to log into the Web User
Interface again, using the new IP address.
Default Subnet Mask: Enter the subnet mask used here.
Host Name: Enter the host name here.
Local Domain Name: Enter the local domain name here. This field is optional.
Enable DNS Relay: Tick this option to enable the DNS relay option.
In this section, the following parameters can be configured:
Enable DHCP Server: Select this option to enable the DHCP Server option.
DHCP IP Address Range: Enter the starting and ending IP address host number
value for the DHCP Server pool here.
DHCP Lease Time: Enter the DHCP lease time value used here.
Always broadcast: Tick this option to enable the always broadcast feature.
To Next Page
Loading...
Need help?
General
