Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 58
In this section, the following parameters can be configured:
Enable: Tick this option to enable the DHCP IP address reservation feature.
Computer Name: Enter the computer’s name here. Alternatively select the
computer name from the Computer Name drop-down menu and click the <<
button to place it into the textbox.
IP Address: Enter the IP address that will be reserved for the node here.
MAC Address: Enter the MAC address of the node being reserved here. Click the
Clone Your PC’s MAC Address button to copy and paste your PC’s MAC
address in the textbox.
Click the Add/Update button to add or update a DHCP reservation entry, based on the information entered.
Click the Clear button to clear out the information entered in the fields mentioned above.
In this section, a list of DHCP reservations will be display.
Click the
icon to modify a specific entry.
Click the
icon to delete a specific entry.
In this section, a list of dynamic DHCP clients will be displayed.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.
To Next Page
Loading...
