Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 76
In this section, the following parameters can be configured:
Enable Automatic IPv6 address assignment: Tick this option to enable automatic
IPv6 address assignment.
Enable Automatic DHCP-PD in LAN: Tick this option to enable automatic DHCP-
PD in LAN.
Autoconfiguration Type: Select the IPv6 auto-configuration type here. Options to
choose from are SLAAC+RDNSS, SLAAC+Stateless DHCP, and Stateful
DHCPv6.
Router Advertisement Lifetime: After selecting SLAAC+Stateless DHCP as the
auto-configuration type, enter the router advertisement lifetime value here.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.
In this section, the following parameters can be configured:
Enable Automatic IPv6 address assignment: Tick this option to enable automatic
IPv6 address assignment.
Enable Automatic DHCP-PD in LAN: Tick this option to enable automatic DHCP-
PD in LAN.
Autoconfiguration Type: Select the IPv6 auto-configuration type here. Options to
choose from are SLAAC+RDNSS, SLAAC+Stateless DHCP, and Stateful
DHCPv6.
IPv6 Address Range (Start): After selecting Stateful DHCPv6 as the auto-
configuration type, enter the starting IPv6 address and prefix for the range
here.
IPv6 Address Range (End): After selecting Stateful DHCPv6 as the auto-
configuration type, enter the ending IPv6 address and prefix for the range here.
IPv6 Address Lifetime: After selecting Stateful DHCPv6 as the auto-configuration
type, enter the IPv6 address lifetime value here.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.
To Next Page
Loading...
