Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration Page 77
IPv6 Connection Type – Static IPv6
In this section, the following parameters can be configured:
My IPv6 Connection is: Select the IPv6 Internet connection type that will be used
by this router. Options to choose from are Auto Detection, Static IPv6, Auto-
configuration (SLAAC/DHCPv6), PPPoE, IPv6 in IP4 Tunnel, 6to4, 6rd, and
Local Connectivity Only. In this section we’ll discuss the Static IPv6 option.
In this section, the following parameters can be configured:
Use Link-Local Address: Tick this option to use the link-local address.
IPv6 Address: After choosing not to use the link-local address, enter the IPv6
address here.
Subnet Prefix Length: After choosing not to use the link-local address, enter the
subnet prefix length value here.
Default Gateway: Enter the default gateway IPv6 address here.
Primary DNS Server: Enter the primary IPv6 DNS server address here.
Secondary DNS Server: Enter the secondary IPv6 DNS server address here.
In this section, the following parameters can be configured:
LAN IPv6 Address: Enter the LAN IPv6 address here.
LAN IPv6 Link-Local Address: This field will display the LAN IPv6 link-local
address here.
To Next Page
Loading...
