xStack Storage Management Center Software User’s Guide 135
Appendix B Factory Default Settings
This appendix lists the xStack Storage factory-default settings.
Table B-1. Battery Policy Default Setting
Parameter Default Value
If the battery fails, the xStack Storage should Stop buffering I/O in cache
Table B-2. Date and Time Default Setting
Parameter Default Value
Time Zone UTC
Table B-3. Modify System TCPIP Default Settings
Parameter Default Value
Max. Segment Size 8960
Window Scale 0
Time To Live (TTL) 64
PMTU Enabled True
Table B-4. Set Cache Mode Default Setting
Parameter Default Value
Write Back Enabled
Table B-5. Set Default Task Priority Setting
Parameter Default Value
Default Priority 5
Table B-6. Set Spare Count Default Setting
Parameter Default Value
Number of Spare Counts 0
Table B-7. Modify iSCSI Port Default Setting
Parameter Default Value
New SCSI Port 3260
To Next Page
Loading...