D-Link DSN-5410-10 - xStack Storage Area Network Array Hard Drive - Page 80

70 Chapter 4 Managing Volumes
2. Perform one of the following steps to remove the selected iSCSI initiator:
– On the Initiators menu, click Remove Initiator.
– In the Initiator Actions panel, click Remove Initiator.
– Press the right mouse button, then click Remove Initiator from the shortcut menu.
To avoid possible data loss or corruption, do not remove an iSCSI initiator
when there is disk input/output (I/O) activity occurring between the
initiator and the array.