Unified Services Router User Manual
102
Figure 65: SSL VPN policy configuration
To configure a policy for a single user or group of users, enter the following
information:
Policy for: The policy can be assigned to a group of users, a single user, or all
users (making it a global policy). To customize the policy for specific users or
groups, the user can select from the Available Groups and Available Users
drop down.
Apply policy to: This refers to the LAN resources managed by the DSR, and the
policy can provide (or prevent) access to network resources, IP address, IP
network, etc.
Policy name: This field is a unique name for identifying the policy. IP address:
Required when the governed resource is identified by its IP address or range
of addresses.
Mask Length: Required when the governed resource is identified by a range of
addresses within a subnet.
To Next Page
Loading...
