Unified Services Router User Manual
48
Figure 26: WAN2 configuration for 3G internet (part 1)
Cellular 3G internet access is available on WAN2 via a 3G USB modem for DSR-
1000 and DSR-1000N. The cellular ISP that provides the 3G data plan will provide
the authentication requirements to establish a connection. The dial Number and APN
are specific to the cellular carriers. Once the connection type settings are configured
and saved, navigate to the WAN status page (Setup > Internet Settings > WAN
Status) and Enable the WAN2 link to establish the 3G connection.
To Next Page
Loading...
