Unified Services Router User Manual
62
connect within 60 seconds of clicking the ―Configure via PIN‖ button immediately
below the PIN field. There is no LED indication that a client has connected.
Push Button Configuration (PBC): for wireless devices that support PBC, press
and hold down on this button and within 2 minutes click the PBC connect button.
The AP will detect the wireless device and establish a link to the client.
More than one AP can use WPS, but only one AP can be used to establish WPS
links to client at any given time.
Figure 37: WPS configuration for an AP with WPA/WPA2 profile
To Next Page
Loading...
