D-Link DSR-500 - Page 194

Unified Services Router User Manual
192
%s: mac_del
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
%02x, ((u_int8_t *)p)[i]
DEBUG
%s: mac_kick
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
first difference at byte %u, i
DEBUG
%s: mac_undefined
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
%s: , t->name
DEBUG
%s: addr_add
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
FAIL: ieee80211_crypto_newkey failed
DEBUG
%s: addr_del
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
FAIL: ieee80211_crypto_setkey failed
DEBUG
%s: mac_undefined
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
FAIL: unable to allocate skbuff
DEBUG
%s: set_float %d;%d,
DEBUG
FAIL: ccmp encap failed
DEBUG
IRQ 32 is triggered
DEBUG
FAIL: encap data length mismatch
DEBUG
ip_finish_output2: No header cache and
no neighbour!
DEBUG
FAIL: encrypt data does not compare
DEBUG
a guy asks for address mask. Who is it?
DEBUG
FAIL: ccmp decap failed
DEBUG
icmp v4 hw csum failure)
DEBUG
FAIL: decap botch; length mismatch
DEBUG
expire>> %u %d %d %d, expire,
DEBUG
FAIL: decap botch; data does not
compare
DEBUG
expire++ %u %d %d %d, expire,
DEBUG
PASS
DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash,
DEBUG
%u of %u 802.11i AES-CCMP test
vectors passed, pass, total
DEBUG
rt_bind_peer(0) @%p,
NET_CALLER(iph)
DEBUG
%s: 0x%p len %u, tag, p, len
DEBUG
ip_rt_advice: redirect to
DEBUG
%03d:, i
DEBUG
ip_rt_bug: %u.%u.%u.%u ->
%u.%u.%u.%u, %s,
DEBUG
%02x, ((u_int8_t *)p)[i]
DEBUG
udp cork app bug 2)
DEBUG
first difference at byte %u, i
DEBUG
udp cork app bug 3)
DEBUG
ieee80211_crypto_newkey failed
DEBUG
udp v4 hw csum failure.)
DEBUG
ieee80211_crypto_setkey failed
DEBUG
UDP: short packet: From
%u.%u.%u.%u:%u %d/%d to
%u.%u.%u.%u:%u,
DEBUG
unable to allocate skbuff
DEBUG
UDP: bad checksum. From
%d.%d.%d.%d:%d to
%d.%d.%d.%d:%d ulen %d,
DEBUG
tkip enmic failed
DEBUG
%s: lookup policy [list] found=%s,
DEBUG
enmic botch; length mismatch
DEBUG
%s: called: [output START],
__FUNCTION__
DEBUG
enmic botch
DEBUG
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl4_dst, family)
DEBUG
tkip encap failed
DEBUG
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl4_src, family)
DEBUG
encrypt phase1 botch
DEBUG