16D-Link DUB-1312 User Manual
Section 2 - Installation
After installation, the Connection Speed LED on the DUB-1312 will illuminate solid orange only if the device is connected to
a 1 Gbps network. It will remain o if the DUB-1312 is connected to a 10/100 Mbps network. The Link/ACT LED will be solid
green when a connection is present, and will ash green when data is being transmitted or received.
If both LEDs are unlit, there may be a problem with the physical connection. Check the connection and cables between the
DUB-1312 and your switch or router. Also verify that your network switch or router is powered on.
Completing the Installation
Number Indication Status Description
1 Connection Speed
Solid 1 Gbps connection present
O 10/100 Mbps connection present
2 Link/ACT
Solid An active connection is present
Flashing Data is being transmitted/received
1
2
To Next Page
Loading...
