7D-Link DUB-1312 User Manual
Section 2 - Installation
Windows Vista®
After you insert the CD into the CD drive, the DUB-1312 menu screen
will appear. Click Install to begin the DUB-1312 driver installation. The
InstallShield Wizard window will pop up.
This driver does not have WHQL digitally signed certication. If you see a
warning message regarding WHQL status, you must accept unsigned driver
installation in order to continue. Windows Vista x64 users should disable
WHQL checking in order to install the driver.
Note: The DUB-1312 user interface may dier in appearance for dierent regions.
When the InstallShield Wizard is complete, plug the DUB-1312’s USB cable
into an available USB port on your PC. Within a few seconds, Windows will
detect a new device and install the device driver software automatically.
When the driver installation is complete, proceed to “Connecting the Adapter
to a Network” on page 15.
To Next Page
Loading...
