19D-Link DUB-1312 User Manual
Section 3 - Troubleshooting
Linux 2.6.x
To verify if the DUB-1312 driver is properly installed:
• Load the DUB-1312 module by the following command:
[root@localhost template]# modprobe usbnet
[root@localhost template]# insmod DUB-13X2.ko
• List the loaded modules with the specified pattern “DUB_13X2”:
[root@localhost template]# lsmod | grep DUB_13X2
Then you should get a reply similar to the following lines:
DUB_13X2
DUB_13X2 22667 0
Usbnet 25214 1 DUB_13X2
If you have a problem installing the D-Link DUB-1312 USB driver, please contact D-Link Technical Support.
To Next Page
Loading...
