D-Link DWA-140 - Page 37

37D-Link DWA-140 User Manual
Section 4 - Wireless Security
It is recommended to enable WPA-PSK on your wireless router or access point before conguring your wireless adapter.
Make sure you enter the passphrase exactly the same on all wireless devices.
1. Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. Click on New to
create a new prole or highlight an existing prole and click Modify.
2. Select WPA/WPA2 Pass phrase under Set Security
Option.
3. Select TKIP or AES.
4. Enter the passphrase exactly as it is on your wireless
router or access point.
5. Click OK to connect to the network. Allow up to 30
seconds to connect.