8D-Link DWA-192 User Manual
Section 2 - Installation
Driver Installation
Before using the DWA-192 AC1900 Wi-Fi USB 3.0 Adapter, you must rst
install a device driver from the included D-Link CD.
Warning: Do NOT connect the DWA-192 AC1900 Wi-Fi USB 3.0 Adapter to your
computer’s USB port before installing the driver software from the D-Link CD.
Turn on the computer and insert the D-Link DWA-192 Driver CD in the
CD-ROM drive.
Note: If the CD Autorun function does not automatically start on your
computer, go to Start > Run. In the run box type “D:\autorun.exe” (where
D: represents the drive letter of your CD-ROM drive).
The D-Link DWA-192 InstallShield Wizard window will appear. Select the
setup language from the list and click Next.
To Next Page
Loading...
