D-Link DWA-582 - Installation; Getting Started; Remove Existing Installations

7D-Link DWA-582 User Manual
Section 2 - Installation
Getting Started
Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in the Device
Manager before installing your D-Link adapter. Also, if you have previously installed another wireless adapter, please make
sure any software is uninstalled.
BeforeinstallingyournewD-Linkwirelessadapter,pleaseverifythefollowing:
•Removeanypreviousinstallationsofwirelessadapters
•Disableanybuilt-inwirelessadapters
•VerifythesettingssuchastheSSIDandsecuritysettingsofthenetwork(s)youwanttoconnectto
Remove Existing Installations
If you’ve installed a dierent manufacture’s adapter or a dierent model D-Link adapter, make sure the software is uninstalled
before installing the new software. Some utilities may cause a conict with the new software. If you plan to use multiple adapters
at dierent times, make sure the utilities are not set to load when your computer boots up. To remove any old software, click
Start > ControlPanel > UninstallPrograms.