D-Link DWR-978 - Page 22

18D-Link DWR-978 User Manual
Section 3 - Conguration
Network Settings
Internet
Connection:
Select the Internet Connection type of the IPv4 WAN.
Dial-Up
Prole:
Select the Dial-Up Prole to be Auto-Detection or Manual.
PDP Type: Select the PDP Type to be Auto, IPv4 or IPv6.
Pin Code: Indicates the Pin Code of the connection.
Reconnect
Mode:
Select Reconnect Mode to be Auto or Manual.
Primary DNS
Server:
Enter the primary DNS IP address that will be assigned to DHCP
clients.
Secondary
DNS Server:
Enter the secondary DNS IP address that will be assigned to
DHCP clients.
Keep Alive: Indicates whether Keep Alive is Enabled or Disabled.
Ping IP
Address:
Enter Ping IP Address to ping test the connection.
Ping Interval: Indicates the Ping Interval.
Click Submit to save your settings, or Cancel to revert to your previous settings.