User Manual of DWR-M961
-13-
LED STATE FUNCTION
POWER
On Device power on
Off Device power off
2.4G
On
The 2.4GHz Wi-Fi is activated.
Flash Device is transmitting data wirelessly over 2.4GHz.
Off
The 2.4GHz Wi-Fi is disabled.
5.8G
On
The 5.8GHz Wi-Fi is activated.
Flash Device is transmitting data wirelessly over 5.8GHz.
Off
The 5.8GHz Wi-Fi is disabled.
WPS
Flash
WPS is
triggered
Off
WPS is connected or disable
LAN1-4
On
Link is established.
Flash Packets are transmitting or receiving.
Off
LAN port is not connected.
WAN
On Link is established.
Flash Packets are transmitting or receiving.
Off WAN port is not connected.
USB
On USB connection is established.
Flash Data is being transmitted.
Off USB connection is not established.
LTE
On LTE or 3G is connected
Off LTE or 3G is not connected
Reset
On When Router will Reset
Off Normal Status
Table 2-1 LED Indications
To Next Page
Loading...
