User Manual of DWR-M961
-25-
Figure 4-5 IP and DNS Server Addresses
Now, you can run the Ping command in the command prompt to verify the network connection between your
PC and the Router. The following example is in Windows 7 OS. Please follow the steps below:
1. Click on Start
2. Type “cmd” in the Search box.
Figure 4-6
3. Open a command prompt, and type ping 192.168.0.1, and then press Enter.
If the result displayed is similar to Figure 4-7, it means the connection between your PC and t he
Router has been established well.
Figure 4-7 Successful Ping Command
To Next Page
Loading...
