D-Link Unified Access System Software User Manual
02/15/2011
Page 30 Document 34CS3000-SWUM104-D10
• IP Tunneling
• Spanning Tree
• Auto detection and configuration of APs
• Automatic Peer-Switch Discovery
• Automatic or Manual RF Channel Assignment
• Automatic or Manual AP Power Adjustment
• AP Authentication
• Client Authentication
• Load Balancing
• RF Scan and AP Sentry Mode
• Dual Radio Support
• Multiple Mode Support for Radios:
- IEEE 802.11a
- IEEE 802.11b/g
- IEEE 802.11b/g/n
- IEEE 802.11a/n
- 2.4 GHz IEEE 802.11n
- 5 GHz IEEE 802.11n
- Dynamic Turbo 5Ghz
- Dynamic Turbo 2.4 Ghz
• IEEE 802.11h (TPC and DFS)
• Security Standard Support:
- WEP (64, 128)
- WEP (152)
-TKIP
- AES & CCMP
- Inhibit SSID broadcast
- WPA (Personal)
- WPA (Enterprise)
- WPA2 (Personal) 802.11i
- WPA2 (Enterprise) 802.11i
• MAC Authentication
• Multiple BSSID/VLANs
• Security and Authentication Settings per SSID
• VLAN Support
• IEEE 802.11d (Country Code)
• IEEE 802.11e (WMM)
• RADIUS support
• WLAN Visualization (NMS like product for APs)
• Mobility
- Inter- and Intra- Subnet Fast Roaming
Note: For the IEEE 802.11e, only Unscheduled Automatic Power Save Delivery (U-APSD), part of the 802.11e,
is supported when DWL-8600APs are managed by a DWS-3000 switch.