D-Link Unified Access System Software User Manual
02/15/2011
Page 184 Document 34CS3000-SWUM104-D10
Viewing Interface Activation Status
The Interface Activation Status page shows information for every interface assigned to a captive portal instance. Use the
menus to select the portal or interface with the information you want to view.
Figure 91: Interface Activation Status
Table 75 describes the fields on the Interface Activation Status page.
Click Refresh to update the screen with the most current information.
Viewing Interface Capability Status
The Interface Capability Status page contains information about interfaces that can have CPs associated with them. The
page also contains status information for various capabilities. Specifically, this page indicates what services are provided
through the CP to clients connected on this interface. The list of services is determined by the interface capabilities.
Table 75: Interface Activation Status
Field Description
Operational Status Shows whether the portal is active on the specified interface. Possible values are Enabled or
Disabled.
Disable Reason If the selected CP is disabled on this interface, this field indicates the reason, which can be
one of the following:
• Interface Not Attached
• Disabled by Administrator
Blocked Status Indicates whether the captive portal is temporarily blocked for authentications. Possible
values are:
• 0 – Not blocked
• 1 – Blocked
The default is 0.
Authenticated Users Displays the number of authenticated users using the captive portal instance on this interface.
The default is 0.
To Next Page
Loading...
