D-Link DWS-3000 Series - Enabling and Configuring Additional Vaps; Figure 41: AP Profile with VAP Enabled

D-Link Unified Access System Software User Manual
02/15/2011
Page 94 Document 34CS3000-SWUM104-D10
Enabling and Configuring Additional VAPs
When a wireless client searches for available wireless networks, each VAP you enable on the VAP tab appears as a
separate network to the wireless client. Figure 41 shows an example of an AP Profile with a VAP enabled. Each VAP uses
a different network.
Figure 41: AP Profile With VAP Enabled