D-Link ShareCenter DNS-327L - Page 63

61D-Link ShareCenter DNS-327L User Manual
Section 4 - Conguration
The D-Link Storage Utility will open. Make sure you are connected to your lo-
cal LAN, then click the Refresh button. The D-Link Storage Utility will nd the
D-Link DNS-327L.
Click Conguration to open the web-based conguration utility using your
computer’s default web browser.
Use the drop-down list to enable or disable Receive DHCP. If this is disabled,
you will be able to manually congure your LAN settings. Click Apply to save
the current conguration.
To map a NAS volume, select a Volume from the list then click the Connect
button.