D-Link ShareCenter DNS-345

116D-Link ShareCenter DNS-345 User Manual
Section 4 - Conguration
Modifying an iSCSI Target
Select the Target you wish to modify (it will turn to red).
Click the Modify button.
Modifying the iSCSI Target allows you to change the size and
the CHAP Settings. However, it does not allow you to change
the Name and Volume directories.
NOTE: You can verify a user’s identity using CHAP authentication.
A CHAP password must be entered from the initiator for
verication before it can connect to the target.
When the Modify iSCSI Target window opens, change the
storage size, and click the Enable button under CHAP Settings.
Enter a username, password, and conrm the password.
Click Save to continue or click Exit to cancel the settings.
NOTE: The iSCSI Target name can contain numbers, letters of
the alphabet and some symbol like dash “-” , colon “:’”and “.”. The
CHAP name must be from 1 to 8 characters. The CHAP password
must be from 12 to 16 characters. Both the name and password
can consist of English letters, numbers, and underscore.