238D-Link ShareCenter DNS-345 User Manual
Section 4 - Conguration
SMS Settings
The same alerts of system conditions that can be sent to an email box can also be sent to a mobile phone or by SMS text messages. You need to
have an agreement with a SMS service gateway that the device can then be congured to send the alerts to. The service provider then sends the
received alerts to the congured mobiles as text messages.
Enable SMS
Notications:
Check this box to enable SMS alerts to be sent to
your mobile phone.
SMS Service Provider: Select from the drop-down list your SMS service
provider you would like to use (these are added
with the Add button)
Add button: Click on the Add button and enter the information
into the appropriate elds that your provider has
given you to use for the conguration.
Delete button: Remove the selected Service Provider from the
conguration.
URL: The specic service provider URL provided and
added in the Add procedure.
Replace space
character with:
If required by your service provider enter a
character that will be used for the space.
Phone Number 1: Automatically populated from the Add button
function.
Phone Number 2: Enter a second mobile telephone number.
Verify that the number input is according to the
configuration instructions from your Mobile
Service Provider.
Test SMS button: Click this button to send a test message to your
mobile phone to verify the settings are correct
and the API URL is functioning with your provider.
To Next Page
Loading...
Need help?
General
