D-Link ShareCenter DNS-345

233D-Link ShareCenter DNS-345 User Manual
Section 4 - Conguration
System Settings
System Settings provides features to control your DNS-345. Users can restart the NAS, restore the system to it’s original state, set idle times, shutdown
the system, congure settings, and congure system temperature settings.
Restart: Click to reboot the DNS-345.
Default: Click to restore the device back to the factory
default settings. All previous settings that have been
congured will be erased.
Shutdown: Click to turn o the DNS-345.
Conguration
Settings:
Click on the Save button to save the current
conguration settings to a le on your computer. If
at a later time you need to reload this conguration
after a system reset, browse to the le and click Load.
Idle Time: Enter the time (in minutes) that the administrator and
users will be allowed to remain idle while accessing
the web UI.
System
Temperature
Threshold:
Here you can configure the system temperature
threshold value. This value can be set in Fahrenheit
or Celsius. The device will automatically shutdown
when it reaches the temperature set here.