Configuration D-Link Web Smart Switch User Manual
5
5
1
1
Figure 4.57 – L2 Functions > LLDP > 802.1 Extension TLV Port Settings
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
Port VLAN ID: Specifies the port VLAN ID TLV to be enabled or disabled.
VLAN Name: Specifies the VLAN name TLV to be enabled or disabled in the LLDP port. If enabled, users
can specify the content of VLAN ID, VLAN Name or All.
Protocol Identity: Specifies the Protocol Identity TLV to be enabled or disabled in the LLDP port. If enabled,
users can specify the EAPOL, LACP, GVRP, STP or All.
Click Apply to implement the changes made. Click Refresh to refresh the table information.
The 802.3 Extension LLDP Port Settings window displays 802.3 Extension LLDP port information and
contains parameters for configuring 802.3 Extension LLDP port settings.
L2 Functions > LLDP > 802.3 Extension TLV
To Next Page
Loading...
Need help?
General