D-Link xStack DES-3526 - Page 104

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
101
DES-3526:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN TYPE : static Advertisement : Enabled
Member ports : 1,5-26
Static ports : 1,5-26
Current Untagged ports : 1,5-26
Static Untagged ports : 1,5-26
Forbidden ports :
VID : 4094 VLAN Name : Trinity
VLAN TYPE : static Advertisement : Enabled
Member ports : 2-4
Static ports : 2-4
Current Untagged ports : 2-4
Static Untagged ports : 2-4
Forbidden ports :
Total Entries : 2
DES-3526:4#
show gvrp
Purpose Used to display the GVRP status for a port list on the Switch.
Syntax
show gvrp {<portlist>}
Description This command displays the GVRP status for a port list on the Switch
Parameters
<portlist> − Specifies a port or range of ports for which the GVRP
status is to be displayed.
Restrictions None.
Example usage:
To display GVRP port status:
DES-3526:4#show gvrp 1-10
Command: show gvrp 1-10
Global GVRP : Disabled
Port PVID GVRP Ingress Checking Acceptable Frame Type
------ ---- -------- ---------------- ---------------------------
1 1 Disabled Enabled All Frames
2 1 Disabled Enabled All Frames
3 1 Disabled Enabled All Frames
4 1 Disabled Enabled All Frames
5 1 Disabled Enabled All Frames
6 1 Disabled Enabled All Frames
7 1 Disabled Enabled All Frames
8 1 Disabled Enabled All Frames
9 1 Disabled Enabled All Frames
10 1 Disabled Enabled All Frames
Total Entries : 10
DES-3526:4#