DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
112
delete address-binding
Purpose Used to delete IP-MAC Binding entries.
Syntax
[ip-mac [ipaddress <ipaddr> mac_address <macaddr> | all] |
blocked [all | vlan_name <vlan_name> mac_address
<macaddr>]]
Description This command will delete IP-MAC Binding entries. Two different
kinds of information can be deleted.
• IP_MAC –Individual Address Binding entries can be
deleted by entering the physical and IP addresses of the
device. Toggling to all will delete all the Address Binding
entries.
• Blocked – Blocked address binding entries (bindings
between VLAN names and MAC addresses) can be
deleted by entering the VLAN name and the physical
address of the device. To delete all the Blocked Address
Binding entries, toggle all.
Parameters <ipaddr> The IP address of the device where the IP-MAC binding
is made.
<macaddr> The MAC address of the device where the IP-MAC
binding is made.
<vlan_name> The VLAN name of the VLAN that is bound to a
MAC address in order to block a specific device on a known
VLAN.
all – For IP_MAC binding all specifies all the IP-MAC binding
entries; for Blocked Address Binding entries all specifies all the
blocked VLANs and their bound physical addresses.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an IP-MAC Binding on the switch:
DES-3526:4#delete address-binding ip-mac ipaddress 10.1.1.1
mac_address 00-00-00-00-00-06
Command: delete address-binding ip-mac ipaddress 10.1.1.1
mac_address 00-00-00-00-00-06
Success.
DES-3526:4#
To Next Page
Loading...
Need help?
General