D-Link xStack DES-3526 User Manual

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
122
Example usage:
To show IGMP snooping:
DES-3526:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Multicast router Only : Disabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Route Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
VLAN Name : vlan2
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Route Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
Total Entries: 2
DES-3526:4#
show igmp_snooping group
Purpose Used to display the current IGMP snooping group configuration on the
Switch.
Syntax
show igmp_snooping group {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping group
configuration on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which to view IGMP
snooping group configuration information.
Restrictions None.
Example usage:
To show IGMP snooping group:

D-Link xStack DES-3526 Specifications

General

Brand	D-Link
Model	xStack DES-3526
Category	Switch
Language	English