D-Link xStack DES-3526 - Page 126

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
123
DES-3526:4#show igmp_snooping group
Command: show igmp_snooping group
VLAN Name : default
Multicast group: 224.0.0.2
MAC address : 01-00-5E-00-00-02
Reports : 1
Port Member : 2,5
VLAN Name : default
Multicast group: 224.0.0.9
MAC address : 01-00-5E-00-00-09
Reports : 1
Port Member : 6,8
VLAN Name : default
Multicast group: 234.5.6.7
MAC address : 01-00-5E-05-06-07
Reports : 1
Port Member : 4,10
VLAN Name : default
Multicast group: 236.54.63.75
MAC address : 01-00-5E-36-3F-4B
Reports : 1
Port Member : 18,22
VLAN Name : default
Multicast group: 239.255.255.250
MAC address : 01-00-5E-7F-FF-FA
Reports : 2
Port Member : 9,19
VLAN Name : default
Multicast group: 239.255.255.254
MAC address : 01-00-5E-7F-FF-FE
Reports : 1
Port Member : 13,17
Total Entries : 6
DES-3526:4#
show router_ports
Purpose Used to display the currently configured router ports on the Switch.
Syntax
show router_ports {vlan <vlan_name 32>} {static | dynamic}
Description This command will display the router ports currently configured on the
Switch.
Parameters
<vlan_name 32> − The name of the VLAN on which the router port
resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically
configured.
Restrictions None.
Example usage:
To display the router ports.