DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
124
DES-3526:4#show router_ports
Command: show router_ports
VLAN Name : default
Static router port : 1-2,10
Dynamic router port :
Total Entries: 1
DES-3526:4#
show igmp_snooping forwarding
Purpose Used to display the IGMP snooping forwarding table entries on the
Switch.
Syntax
show igmp_snooping forwarding {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping forwarding
table entries currently configured on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which to view IGMP
snooping forwarding table information.
Restrictions None.
Example usage:
To view the IGMP snooping forwarding table for VLAN “Trinity”:
DES-3526:4#show igmp_snooping forwarding vlan Trinity
Command: show igmp_snooping forwarding vlan Trinity
VLAN Name : Trinity
Multicast group : 224.0.0.2
MAC address : 01-00-5E-00-00-02
Port Member : 17
Total Entries: 1
DES-3526:4#
show igmp_snooping group
Purpose Used to display the current IGMP snooping configuration on the
Switch.
Syntax
show igmp_snooping group {vlan <vlan_name 32>}
Description This command will display the current IGMP setup currently
configured on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which to view IGMP
snooping group information.
Restrictions None.
Example usage:
To view the current IGMP snooping group:
To Next Page
Loading...
