xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Example usage:
To configure the traffic scheduling mechanism for each COS queue:
DGS-3400:4#config scheduling_mechanism strict
Command: config scheduling_mechanism strict
Success.
DGS-3400:4#
show scheduling_mechanism
Purpose Used to display the current traffic scheduling mechanisms in use on
the Switch.
Syntax
show scheduling_mechanism
Description This command will display the current traffic scheduling mechanisms
in use on the Switch.
Parameters None.
Restrictions None.
Example Usage:
To show the scheduling mechanism:
DGS-3400:4#show scheduling_mechanism
Command: show scheduling_mechanism
QOS scheduling_mechanism
CLASS ID Mechanism
-------- -----------
Class-0 strict
Class-1 strict
Class-2 strict
Class-3 strict
Class-4 strict
Class-5 strict
Class-6 strict
DGS-3400:4#
enable hol_prevention
Purpose Used to enable HOL prevention.
Syntax
enable hol_prevention
Description The enable hol_prevention command enables Head of Line prevention.
Parameters None.
Restrictions You must have administrator privileges.
Example Usage:
To enable HOL prevention:
98
To Next Page
Loading...
