D-Link xStack DGS-3450 - Page 105

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#disable mirror
Command: disable mirror
Success.
DGS-3400:4#
show mirror
Purpose Used to show the current port mirroring configuration on the Switch.
Syntax
show mirror
Description This command displays the current port mirroring configuration on
the Switch.
Parameters None
Restrictions None.
Example usage:
To display mirroring configuration:
DGS-3400:4#show mirror
Command: show mirror
Current Settings
Mirror Status : Enabled
Target Port : 1
Mirrored Port :
RX :
TX : 5-7
DGS-3400:4#
102