D-Link xStack DGS-3450 - Page 110

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
To display the Switch’s current VLAN settings:
DGS-3400:4#show vlan
Command: show vlan
VLAN TYPE : static Advertisement : Enabled
Static ports : 32
Untagged ports : 32
Member ports : 33-40,49-50
Forbidden ports :
VID : 1 VLAN Name : default
Member ports : 32,49-50
Forbidden ports :
VID : 2 VLAN Name : 1
VLAN TYPE : static Advertisement : Enabled
Static ports : 33-40
Untagged ports : 33,35,37,39
Total Entries : 2
DGS-3400:4#
show gvrp
Purpose Used to display the GVRP status for a port list on the Switch.
Syntax
show gvrp {<portlist>}
Description This command displays the GVRP status for a port list on the Switch
Parameters
<portlist> − Specifies a port or range of ports for which the GVRP
status is to be displayed.
Restrictions None.
Example usage:
To display GVRP port status:
107