xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#create iproute default 1234::5D7F/32 2D30::AC21 metric 1
Command: create iproute default 1234::5D7F/32 2D30::AC21 metric 1
Success.
DGS-3400:4#
delete iproute ipv6 default
Purpose Used to delete a default IPv6 route entry from the Switch’s IP routing
table.
Syntax
delete iproute ipv6 default
Description This command will delete an existing default entry from the Switch’s
IP routing table.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the default IPv6 route:
DGS-3400:4#delete iproute default
Command: delete iproute default
Success.
DGS-3400:4#
187
To Next Page
Loading...
