D-Link xStack DGS-3450 - Page 193

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
show mac_notification
Purpose Used to display the Switch’s MAC address table notification global
settings
Syntax
show mac_notification
Description This command is used to display the Switch’s MAC address table
notification global settings.
Parameters None.
Restrictions None.
Example usage:
To view the Switch’s MAC address table notification global settings:
DGS-3400:4#show mac_notification
Command: show mac_notification
Global MAC Notification Settings
State : Enabled
Interval : 1
History Size : 1
DGS-3400:4#
show mac_notification ports
Purpose Used to display the Switch’s MAC address table notification status
settings
Syntax
show mac_notification ports <portlist>
Description This command is used to display the Switch’s MAC address table
notification status settings.
Parameters <portlist> - Specify a port or group of ports to be viewed.
Entering this command without the parameter will display the MAC
notification table for all ports.
Restrictions None
Example usage:
To display all port’s MAC address table notification status settings:
190