D-Link xStack DGS-3450 - Page 196

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Command Parameters
enable authen_policy
disable authen_policy
show authen_policy
create authen_login
method_list_name
<string 15>
config authen_login [default | method_list_name <string 15>] method {tacacs | xtacacs | tacacs+ | radius
| server_group <string 15> | local | none}
delete authen_login
method_list_name
<string 15>
show authen_login {default | method_list_name <string 15> | all}
create authen_enable
method_list_name
<string 15>
config authen_enable [default | method_list_name <string 15>] method {tacacs | xtacacs | tacacs+ | radius
| server_group <string 15> | local_enable | none}
delete authen_enable
method_list_name
<string 15>
show authen_enable [default | method_list_name <string 15> | all]
config authen application {console | telnet | ssh | http | all] [login | enable] [default | method_list_name <string
15>]
show authen application
create authen
server_group
<string 15>
config authen
server_group
[tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete] server_host <ipaddr>
protocol [tacacs | xtacacs | tacacs+ | radius]
delete authen
server_group
<string 15>
show authen
server_group
<string 15>
create authen
server_host
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int 1-65535> | key
[<key_string 254> | none] | timeout <int 1-255> | retransmit <int 1-255>}
config authen
server_host
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int 1-65535> | key
[<key_string 254> | none] | timeout <int 1-255> | retransmit <int 1-255>}
delete authen
server_host
<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
show authen
server_host
config authen parameter
response_timeout
<int 0-255>
config authen parameter
attempt
<int 1-255>
show authen parameter
enable admin
config admin
local_enable
Each command is listed, in detail, in the following sections.
193